Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)

OneCommand Manager Command Line Interface User Manual Page 35
Parameters:
WWPN - WWPN of the FC port
MAC - MAC address of the NIC or iSCSI port
GetXcvrData
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd GetXcvrData <WWPN|MAC>
Description: This command shows transceiver data such as vendor name and serial number.
Parameters:
WWPN: Adapter’s WWPN port
MAC - MAC address of the NIC or iSCSI port
Example:
C:\Program Files\emulex\Util\OCManager>hbacmd h=10.192.203.154 m=cim u=root
p=Swamiji001 n=root/emulex getxcvrdata 00-00-c9-93-2f-d6
LoadList
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd LoadList <WWPN>
Description: This command shows the flash memory load list data for the adapter.
Parameters:
WWPN - Adapter’s WWPN
Note: GetXcrvData is not supported for OneConnect OCe11100 series adapters.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 73.
Note: Not supported for OneConnect adapters.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 73.