Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)

OneCommand Manager Command Line Interface User Manual Page 1
Introduction
The OneCommand
™
Manager Command Line Interface (CLI) is a comprehensive management utility
for Emulex host bus adapters (HBAs) and converged network adapters (CNAs).The CLI provides
support for commonly used commands without requiring installation of the OneCommand Manager
Graphical User Interface (GUI). The OneCommand Manager CLI console application name is HbaCmd
and can be installed on Windows, Solaris, Linux and versions of VMware ESX that include a Console
Operating System (COS). A single operation is performed by entering ’hbacmd’ followed by the
command at the command line. For syntax information and details on using the OneCommand Manager
CLI, see “Using the CLI Client” on page 15.
Supported Platforms
Table 1 shows the platforms supported with the OneCommand Manager CLI.
Table 1. OneCommand Manager Application Command Line Interface Supported Platforms
Driver Architecture Operating System
Storport and NDIS Miniport
Drivers
Intel x86, EM64T, AMD64 and IA64
Note: Intel IA64 is supported for FC
adapters only.
Windows Server 2003 Service Pack
2 or later
Windows Server 2008
Windows Server 2008 R2
LPFC 8.2.x Driver Intel x86, EM64T and AMD64 VMware ESX 4.0 and 4.1
LPFC 8.2.0.x Driver Intel x86 and x86_64, PPC, and
AMD64
RHEL 5.5 and later and SUSE Linux
Enterprise Server (SLES) 10.3 and
later
LPFC 8.2.8.X i386
Citrix XenServer 5.6.0
LPFC 8.3.5.x Driver Intel x86 and x86_64, PCC 64, and
AMD64
RHEL 6.0 and later
Intel x86 and x86_64, PCC 64, and
AMD64, IA64
SUSE Linux Enterprise Server
(SLES) 11.1 and later
i386
Citrix XenServer 5.6.100+ and
Citrix XenServer 6.0
Solaris 2.60 Driver Intel x86, EM64T, AMD64 and Sun
SPARC
Solaris 10 and Solaris 11Express
Note: OneConnect™ CNAs are not supported on IA64 or PPC64.
Note: vNIC is supported only on IBM virtual fabric adapters. For specific information
as to whether it is supported on a specific adapter, see the release notes that are
available on the IBM adapter pages on the Emulex website.