Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)

OneCommand Manager Command Line Interface User Manual Page 72
Parameters:
h - Host’s IP address or hostname
WWPN - Adapter’s WWPN port
MAC - MAC address of the NIC or iSCSI port
Example:
C:\Program Files\emulex\Util\OCManager>hbacmd h=10.192.203.154 m=cim u=root
p=Swamiji001 n=root/emulex getqosinfo 00-00-c9-93-2f-d6
GetVPD
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd GetVPD <WWPN|MAC>
Description: This command shows the port’s Vital Product Data (VPD).
Parameters:
WWPN - Adapter’s WWPN
MAC - MAC address of iSCSI or NIC port
ListHBAs
Supported by: Windows, Solaris, Linux and VMware ESX
Description: This command shows a list of the manageable Emulex adapters found by local, remote in-
band (FC), and remote out-of-band (TCP/IP) discovery. For a NIC-only or iSCSI adapter instead of the
Port WWN, the MAC address is displayed. The Node WWN and Fabric WWN are not displayed.
Syntax:
hbacmd [h=<IPAddress>] listhbas [local] [m=model] [pt=type]
Parameters:
h - Host’s IP address
local - Only display local adapters
m=model - Model filter (append * to end of model name for wildcard match, e.g. LP9*)
pt=type - Port type filter (valid types: NIC, iSCSI, FC, FCoE)
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 73.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 73.