Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)

OneCommand Manager Command Line Interface User Manual Page 77
Parameters:
WWPN - Adapter’s WWPN
BindType:
P = Remove binding by WWPN
N = Remove binding by WWNN
D = Remove binding by D_ID
ID:
Target WWPN if BindType = P
Target WWNN if BindType = N
Target D_ID if BindType = D
SCSIBus - Bus number of the SCSI device
SCSITarget - Target number of the SCSI device
SetBindingSupport
Supported by: Windows and Solaris
Syntax:
hbacmd SetBindingSupport <WWPN> <BindFlag>
Description: This command enables and sets the binding support(s) for the adapter.
Parameters:
WWPN - Adapter’s WWPN
BindFlag:
*D = Binding by D_ID
P = Binding by WWPN
*N = Binding by WWNN
*A = Binding by Automap
DA = Binding by D_ID and Automap
PA = Binding by WWPN and Automap
NA = Binding by WWNN and Automap
* Not available for the Storport Miniport driver
SetPersistentBinding
Supported by: Windows and Solaris
Syntax:
hbacmd SetPersistentBinding <WWPN> <Scope> <BindType> <TargetId> <SCSIBus>
<SCSITarget>
Description: This command sets a persistent binding between an FC target and a SCSI Bus target. The
binding can be to a target WWPN, target WWNN, or target D_ID.