Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)
OneCommand Manager Command Line Interface User Manual Page 3
In a New VMware ESX Server
To install the OneCommand Manager CLI in a new VMware system, install the specific rpm file for the
driver for your VMware version.
Prerequisites
• To manage FCoE adapters, the LPFC driver version 8.2, or later, must be loaded.
• To manage NIC or iSCSI adapters, driver version 2.102.440.0, or later, must be loaded.
• To manage iSCSI adapters, the iSCSI driver must be loaded.
Procedures
To install the OneCommand Manager CLI:
1. Log in as ‘root’.
2. Copy the elxocmcore-esxNN-<kit version>.<arch>.rpm file to a directory on the install
machine.
3. CD to the directory to which you copied the rpm file.
4. Install the rpm file. Type:
rpm -Uvh elxocmcore-esxNN-<kit version>.
<arch>
.rpm
Where NN is 40 for an ESX 4.0 system and 41 for an ESX 4.1 system. The rpm contents are installed in
/usr/sbin/ocmanager. The OneCommand Manager CLI is also located in this directory.
In a VMware ESX Server with an Existing HBAnyware or
OneCommand Manager CLI
To install the OneCommand Manager CLI in a VMware system with an existing HBAnyware or
OneCommand Manager CLI installed:
1. Install the rpm file by entering the following command, all on one line:
# rpm -Uvh elxocmcore-esxNN-<kit version>.
<arch>
.rpm
Where NN is 40 for an ESX 4.0 system and 41 for an ESX 4.1 system.
Note: The iSCSI driver is not supported for VMware ESX 4.0.