- HP Vacuum Cleaner User Manual

Leveling Mode
ALCof f
Function Group
ALC
Menu Map 1
Description
This softkey lets you open the ALC loop. Direct and separate control
of the linear modulator circuit (LVL DAC) and attenuator (ATN)
is possible (see Figure A-l). The power level must be set using an
external indicator (power meter/sensor). If the power level is set
when the synthesizer is in CW mode and then pulse modulation is
activated, the peak pulse level equals the CW level. The attenuator
value is set via the Set
atten softkey in the POWER menu.
An asterisk next to the key label indicates that this feature is active.
Programming Codes
SCPI:
POWer:ALC:STATe OFF10
POWer:ATTenuation:AUTO OFF10
Analyzer: SHA3
See Also (ALC_), 0,
MOD Pulse On/Off External, Set Atten
“Working with Mixers,” in Chapter 1.
HP 8360
User’s Handbook
Operating and Programming Reference L-l