HP StorageWorks 8/20q Fibre Channel Switch command line interface quick reference guide (5697-7518, July 2008)

Page 1
Part number: 5697-7518
Second edition: July 2008
Conventions
The command syntax is presented in the following format:
command
operand
operand [value]
operand [value1] [value2]
The command is followed by one or more operands. Consider the
following rules and conventions:
• Commands and operands are case insensitive.
• Required operands and values appear in monospace font:
operand [value]. Optional operands and values are shown
in monospace italics: operand [value].
Underlined portions of the operand in the command format indicate
the abbreviated form that can be used. For example, the del
ete
operand can be abbreviated del.
Commands
admin
start (or begin)
end (or stop)
cancel
alias
add [alias] [member_list]
copy [alias_source] [alias_destination]
create [alias]
del
ete [alias]
list
members [alias]
remove [alias] [member_list]
rename [alias_old] [alias_new]
callhome
cancel
changeover
clear
edit
history
list profile
[profile]
queue [option]
save
test profile [profile]
capture
add
edit
remove
config
act
ivate [config_name]
backup export
cancel
copy [config_source] [config_destination]
del
ete [config_name]
edit [config_name]
export
import
list
restore import
save [config_name]
create
certificate
support
date [MMDDhhmmCCYY]
exit
feature
add [license_key]
log
firmware install
© Copyright 2008 Hewlett-Packard Development Company, L.P.
Second edition July 2008
The information in this document is subject to change without
notice.
www.hp.com
HP StorageWorks
8/20q Fibre Channel Switch
command line interface
quick reference guide