Troubleshooting Guide for SCR+DMI HP 9000 Computers Manufacturing Part Number: Not Assigned August 2000 © Copyright 2000 Hewlett-Packard Company.
Legal Notices The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Troubleshooting SCR+DMI for HP-UX 1 Troubleshooting SCR+DMI for HP-UX This document describes steps you can take if SCR+DMI for HP-UX is not running properly. Step 1. Ensure that DCE/RPC is running correctly on all the systems involved • Check for the necessary daemons, and restart them if necessary.
Troubleshooting SCR+DMI for HP-UX A task dialog labeled “MIF Browser” will be launched. An icon with the system name should be in the dialog. 2. Double-click on the icon with the system name. The contents of the dialog should be replaced with three icons labeled: • DMI 2.0 Service Provider • HP-UX Standard Groups Definition • HP-UX Installed Software Definition 3. Double-click on the HP-UX Standard Groups Definition icon.
Troubleshooting SCR+DMI for HP-UX Table 1-1 Status Values (Continued) Status Detail What this means RtErr Runtime Error. Potential problems include: - file system full, - no memory, - no more processes.
Troubleshooting SCR+DMI for HP-UX 8 Chapter 1
