System Firmware Matrixes - Minimum Firmware Requirements for HP-UX 11i v3, 11i v2 and PCI I/O Adapters

1 HP-UX Minimum System Firmware
NOTE: “NS” means Not Supported in System.
IMPORTANT: HP recommends using the latest version of firmware.
Table 1-1 HP-UX 11i v3 Minimum System Firmware
HP-UX 11i v3 Minimum Firmware LevelSystem
HP Integrity Itanium Systems
04.13rx1600 & rx1620 Servers
02.31rx2600 Server
04.10rx2620 Server
01.05rx2660 Server
1
01.31rx3600 & rx6600 Servers
1
04.10rx4640 Server
03.23rx5670 Server
4.2rx7620, rx8620 & rx8620 IOX
2.0rx7640, rx8640 & rx8640 IOX
FW version rel_6.2SuperDome sx1000 chipset
FW version Recipe 5.5dSuperDome sx2000 chipset
HP 9000 PA-RISC Servers
Not Supportedrp2400/2450
Not Supportedrp2430/2470
PDC 45.44rp34xx
PDC 45.44rp44xx
Not Supportedrp5400 & rp5450
Not Supportedrp5430 & rp5470
Not Supportedrp7400
FW Version 6.5rp7405 & rp7410
FW Version 3.2rp7420, rp8420 & rp8420 IOX
FW Version 6.5rp8400
Firmware Version 6.5rp7440, rp8440, rp8440 IOX
FW Version rel_5.5 (PDC FW version 36.8, Utilities 7.34)HP 9000 SuperDome PA 8600/PA 8700
FW version rel_6.2HP 9000 SuperDome PA 8800/PA 8900
1 HP-UX 11i v3 does not currently support HP rx2660, rx3600 and rx6600 servers with the PCI/PCI-X/PCI-E backplane.
This is expected to be supported in a subsequent release.
5