HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition

Figure 7-13 Lights Out Management Tab

Table 7-1 lists the available rights.

Table 7-1 Lights Out Management Rights

DescriptionRight

This option controls whether users can log in to the associated devices and execute

Status or Read-only commands (view event logs and console logs, check system

status, power status, and so on) but not execute any commands that would alter the

state of the iLO MP or the system.

This option enables users to access the system console (the host OS)Remote Console

This option is currently not supported.Virtual Media

This option enables users to execute iLO MP power operations to remotely power on,

power off, or reset the host platform, as well as configure the system's power restore

policy.

Server Reset and Power

This option enables users to administer local iLO MP user accounts.Administer Local User

Accounts

This option enables users to configure all iLO MP settings, as well as reboot iLO MP

and update iLO MP firmware.

Administer Local Device

Settings

Directory Services for eDirectory

The following sections provide installation prerequisites, preparation, and a working example

of Directory Services for eDirectory.

NOTE: LDAP Lite is not supported with eDirectory.

Installing and Initializing Snap-Ins for eDirectory

For instructions on using the snap-in installation application, see “Installing and Initializing

Snap-Ins for Active Directory” (page 98) .

Directory Services for eDirectory 107