HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition

day of the week in half-hour increments. You can change a single square by clicking it or change
a section of squares by clicking and holding the mouse button, dragging the cursor across the
squares to be changed, and releasing the mouse button. The default setting is to allow access at
all times.
Defining Client IP Address or DNS Name Access
You can grant or deny access to an IP address, IP address range, or DNS names.
To select whether to allow or deny access from all addresses except the specified IP addresses,
IP address ranges, and DNS names, use the By Default menu.
1. To restrict an IP address, select IP/MASK in the Role Restrictions subtab and click Add. The
Add New Restriction screen for the IP/Mask option displays.
2. In the Add New Restriction screen (Figure 7-20), enter the required information, and click
OK.
Figure 7-20 Add New Restriction Screen
3. In the Role Restrictions subtab, select DNS Name and click Add. The DNS Name option
enables you to restrict access based on a single DNS name or a subdomain, entered in the
form of host.company.com or *.domain.company.com. The New DNS Name Restriction
screen appears.
4. Enter the information and click OK.
5. To save the changes, click Apply.
To remove any of the entries, highlight the entry in the display field and click Delete.
Setting Lights-Out Management Device Rights
After you create a role, you can select rights for the role and make users and group objects
members of the role which gives users or group of users the rights granted by that role. Use the
Lights Out Management Device Rights subtab of the HP Management tab (Figure 7-21) to manage
rights.
Directory Services for eDirectory 113