HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition

iLO MP Advanced Pack License
A free 30-day evaluation license is available for download on the HP web site
http://h71028.www7.hp.com/enterprise/cache/279991-0-0-0-121.html The
evaluation license activates and accesses iLO MP Advanced features. You can only install one
evaluation license per iLO MP. After the evaluation period, an iLO MP Advanced Pack license
is required to continue using the advanced features. iLO MP Advanced features automatically
deactivate when the evaluation license key expires.
You can use the following iLO MP Advanced Pack features if you have the license:
• Directory-based authentication and authorization using LDAP
• LDAP Lite: schema-free directory integration
• Secure shell (SSH) access
• Group actions through HP Systems Insight Manager (HPSIM)
Obtaining and Activating iLO MP Advanced Pack Licensing
To utilize iLO MP Advanced Pack license features, you must have the iLO MP and the minimum
required iLO MP firmware version E.03.13 (for more information, see Table 1-1: “Supported
Systems and Required Components Matrix” (page 21)). When you order iLO MP hardware,
either separately or when you purchase a new system, you can also order the iLO MP Advanced
Pack license. You can order just the iLO MP Advanced Pack license if you already have the iLO
MP.
For more information, see the HP web site at:
http://h71028.www7.hp.com/enterprise/cache/279991-0-0-0-121.html
Follow the factory-install or manual install instructions located on the Integrated Lights-Out
Advanced Pack for HP Integrity and HP 9000 Servers; Certificate of License to Use; License Installation
Card to activate your license.
Supported Systems and Required Components and Cables
There are several ways you can connect to the iLO MP. The connection method depends on the
options purchased with your server. The factors in determining which method is available to
you depends mainly on the operating system purchased, and whether iLO hardware was
purchased or included with your server.
Table 1-1 lists the systems on which the iLO MP is supported and the components that are
required to operate the iLO MP:
Table 1-1 Supported Systems and Required Components Matrix
Required CablesRequired ComponentsSupported
Systems
Emulation device connector included with
emulation device (not provided by HP).
• iLO hardware; optional
• Minimum iLO firmware version: E.03.15
rx1600, rx1620,
rx2620
Emulation device connector included with
emulation device (not provided by HP).
• iLO hardware; factory installed
• Minimum iLO firmware version: E.03.15
cx2600, cx2620,
rx2660, rp3410,
rp3440
Emulation device connector included with
emulation device (not provided by HP).
• I/O baseboard; factory installed
• Minimum iLO firmware version: E.03.15
rx4640, rp4410,
rp4440
Emulation device connector included with
emulation device (not provided by HP).
• MP/SCSI Core I/O Card; factory installed
• Minimum iLO firmware version: E.03.15
rx5670
Local I/O cable emulation device connector
included with emulation device (not provided by
HP).
• iLO hardware; factory installed
• Minimum iLO firmware version: E.03.15
BL60p
iLO MP Advanced Pack License 21