HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition

Table 2-2 iLO MP LAN Port Pinouts
Signal DescriptionPin Number
TXP1
TXN2
RXP3
Not used4
Not used5
RXN6
Not used7
Not used8
iLO MP LAN LEDs (rx4640; rp4410/4440)
The internal iLO MP LAN uses an RJ-45 type connector. This connector has two LEDs, LAN link
and LAN activity, that signal status and activity.
Two versions of the (iLO MP) card exist for these servers. Depending on which version of the
card is installed in the server, the iLO MP LAN port LEDs display differently.
On some servers, the LEDs display as in Figure 2-3. Table 2-3 lists the status of the system when
a specific LED condition exists:
Figure 2-3 iLO MP LAN LEDs (rx4640; rp4410/4440) Card Version 1
Table 2-3 iLO MP LAN LED Status Descriptions (rx4640; rp4410/4440) Card Version 1
StatusConditionLED
Linked at 100 MBs. No activityOn100M amber
Linked at 100 MBs. Activity presentBlinking100M amber
Linked at 10 MBs. No activityOn10M green
Linked at 10 MBs. Activity presentBlinking10M green
On other servers, the LEDs display as in Figure 2-4. Table 2-4 lists the status of the system when
a specific LED condition exists:
Figure 2-4 iLO MP LAN LEDs (rx4640; rp4410/4440) Card Version 2
26 Ports and LEDs