HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition

Table 2-4 iLO MP LAN LED Status Descriptions (rx4640; rp4410/4440) Card Version 2
StatusConditionLED
Linked at 100 MBs. No activityOn100M green
Linked at 100 MBs. Activity presentBlinking100M green
Linked at 10 MBs. No activityOn10M amber
Linked at 10 MBs. Activity presentBlinking10M amber
iLO MP LAN LEDs (rx1600; rx1620; rx2600; rx2620; rp3410/3440)
The iLO MP LAN has four LEDs that signal status and activity (Figure 2-5).
Figure 2-5 iLO MP LAN LEDs (rx1600; rx1620; rx2600; rx2620; rp3410/3440)
Table 2-5 describes the status of the system when a specific LED condition exists.
Table 2-5 iLO MP LAN LEDs (rx1600; rx1620; rx2600; rx2620; rp3410/3440)
StateColorLocationLAN LED
iLO MP running selftest or errorYellowTopSelftest
iLO MP has bootedOff
10BT link establishedGreen2nd from top10BT
10BT activityBlinking green
No link or 100BT linkOff
100BT link establishedGreen2nd from bottom100BT
100BT activityBlinking green
No link or 10BT linkOff
Standby power onGreenBottomStandby
Power
Standby power offOff
iLO MP Reset Button
The iLO MP Reset button enables you to reset the iLO MP, and reset the user-specific values to
factory default values. A momentary press causes a soft reset of the iLO MP when the button is
released. A greater than four second press causes a soft reset of the iLO MP upon release; it also
returns user-specific values to factory default values. The following are reset to factory default
values:
• serial terminal baud rate settings
• local user accounts and passwords
iLO MP Reset Button 27