HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition

The following commands available to all users: CL, DATE, DF, HE, LS, MS, PS, SL, SS, SYSREV,

TE, VFP, VDP, WHO, XD (status options).

An iLO MP user can also have any (or all) of the following rights:

• Console Access: Right to access the system console (the host OS). This does not bypass host

authentication requirements, if any:

Command: CO

• Power Control Access: Right to power on, power off, or reset the server, and to configure

the power restore policy:

Commands: PC,PR, RS, TC

• Local User Administration Access: Right to configure locally stored user accounts:

Commands: UC

• iLO MP Configuration Access: Right to configure all iLO MP settings (as well as some system

settings, such as the power restore policy)

Commands: BP, CA, CL, DC, DI, FW, ID, IT, LC, LDAP, LOC, MR, PG, RB, SA, SO, XD

Command line usage and scripting:

UC [ -new <login> —user <text> [ -workgroup <text> ]

[ -mode <single|multiple> ] [ -enable <e|d> ]

[ -password <value> ] ]

[ -change <login> [-login<newlogin> ] [ -user <text> ]

[ -workgroup <text> ] [ -mode <single|multiple> ]

[ -enable <e|d> \ [ -password [ <value> ]

[ -delete <login> ] | [ -list <login> ] ] [ -nc ]

Example:

[gstlhpg1] MP:CM> uc -delete Oper -nc

UC -delete Oper -nc

Current User Parameters:

User Login ID : Oper

User Password : ************

User Name : Default Operator

User Workgroup :

User Access Rights : Console access

User Operating Mode : Multiple

User Enabled/Disabled : Enabled

-> Current User will be deleted

User may be disconnected in this process

-> User Configuration has been updated.

-> Command successful.

[gstlhpg1] MP:CM>