HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition

NOTE: Cookies must be enabled on the web browser in order to successfully log in to the iLO
MP web GUI.
System Status
The System Status tab enables you to access the following pages:
• Status Summary: General and Active Users
• Server Status: General and Identification
• System Event Log
System Status > Status Summary General
The Status Summary General page (Figure 6-1) displays a brief status summary of the system.
Figure 6-1 System Status Summary General Page
Table 6-4 lists the fields and descriptions.
Table 6-4 Status Summary General Page Description
DescriptionFields
The current power state (ON/OFF/STANDBY) of the system and the
corresponding power LED state.
System Power
The most recent entry in the System Event Log (SEL).Latest System Event Log Entry
The current revisions of firmware.Firmware Revisions
The IP address of the iLO MP subsystem.iLO MP IP Address
Displays the date and time as known to the iLO MP.Date & Time
The status of the blue locator or Unit Identifier (UID) LED and enables you
to turn the locator LED on or off.
Locator LED
Web GUI 69