HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition

NOTE: You can only configure the DNS server if DHCP is enabled.
Figure 6-14 Administration > Network Settings > Domain Name Service Page
Table 6-15 lists the fields, buttons, and descriptions.
Table 6-15 DNS Page Description
DescriptionFields and Buttons
Use the DHCP server-supplied domain name.Use DHCP supplied domain
name
This represents the factory-default DNS name of the subsystem, for example,
“hp.com” in “ilo.hp.com”. You can enter a new DNS name.
Domain name
Use the DHCP server-supplied DNS server list.Use DHCP supplied DNS
servers
Register its name with a DDNS server.Register with Dynamic DNS:
Submits the DNS information.Submit
Cancels the action.Cancel
Administration > Firmware Upgrade
The Firmware Upgrade page functionality is only available to authorized HP service personnel.
The MP firmware is packaged along with system, BMC, and FPGA/PSOC firmware.
Download and upgrade the MP firmware package from the HP website at:
http://www.hp.com/go/bizsupport
84 Using iLO