HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition
Figure 7-3 Schema Results Screen
Management Snap-In Installer
The management snap-in installer installs the snap-ins required to manage iLO MP objects in a
Microsoft Active Directory Users and Computers directory or in a Novell ConsoleOne directory.
To create an iLO MP directory using iLO MP snap-ins, perform the following tasks:
• Create and manage iLO MP objects and role objects.
• Make the associations between iLO MP objects and role objects.
Directory Services for Active Directory
HP provides a utility to automate much of the directory setup process. You can download the
HP Directories Support for Management Processors on the HP web site at:
http://h18004.www1.hp.com/support/files/lights-out/us/index.html.
The following sections provide installation prerequisites, preparation, and a working example
of directory services for Active Directory.
Active Directory Installation Prerequisites
The following are prerequisites for installing Active Directory:
• The Active Directory must have a digital certificate installed to enable the iLO MP to connect
securely over the network.
• The Active Directory must have the schema extended to describe iLO MP object classes and
properties.
• The iLO MP firmware must be Version E.03.01 or later.
• iLO MP Advanced Pack features must be licensed.
Directory Services for the iLO MP uses LDAP over SSL to communicate with the directory servers.
Before installing snap-ins and schema for Active Directory, read and have available the following
documentation:
96 Installing and Configuring Directory Services