HP 9100C Digital Sender - (English) Administration Guide

118 Chapter 3 - Administering EN
Late collisions Total number of packets that were not transmitted due to late
collisions (collisions after the 64th byte of a packet).
Log Server Addr. IP address of the host computer that receives syslog messages from
the HP JetDirect print server.
JetDirect Cfg. Indicates how the digital sender has received its TCP/IP
configuration:
BOOTP
Automatically from a BOOTP server.
DHCP
Automatically from a DHCP server.
MANUAL
Manually from entries made at the control panel, from the HP
JetAdmin software, or from other means.
JetDirect ID HP manufacturing identification code assigned to the HP JetDirect
print server.
JetDirect Timeout Timeout value in seconds that an idle data connection is allowed to
remain open. Valid values are 0 to 3600. A value of 0 disables the
timeout mechanism. The default is 90 seconds.
Boot Block Ver. Version of the digital sender startup (boot) program. This information
is used only by HP manufacturing and HP customer support.
Multi-Boot Ver. Version of the digital sender multi-boot program. This information is
used only by HP manufacturing and HP customer support.
Engine FW Ver. Version of firmware used by the digital sender scanner engine. This
information is used only by HP manufacturing and HP customer
support.
Self-test page parameters (continued)
Parameter Descriptions