HP 9100C Digital Sender - (English) Administration Guide

EN Maintaining the hardware 123
Replacing the lower rollers
Replace the lower rollers if they are worn
(if, for example, the digital sender is
picking up multiple sheets of paper).
To replace the lower rollers
1 Shut down the digital sender (see
“Shutting down and restarting” on
page 88).
2 Turn the power off.
3 Raise the control panel.
4 Press down on the plastic cover
located behind the right-hand roller,
and pull the cover towards you.
5 Move the rollers to the right and
remove the rollers and roller bar.
6 Install new lower rollers by inserting
the left side into the matching bar in
the digital sender.
7 Replace the plastic cover, putting the
bottom feet in place first.
3
4
5
6