HP 9100C Digital Sender - (English) Administration Guide

82 Chapter 3 - Administering EN
Email Default From Default e-mail address for the FROM field in
e-mail messages from the digital sender. This default
address is used only when:
users have not registered at the control panel and
send an e-mail message without entering anything
in the FROM field
registered users do not have an e-mail address in
their profile and send an e-mail message
Up to 255 characters are allowed.
If left blank or cleared, the e-mail service is disabled.
Both the E-mail Server Addr. and Email Default From
parameters must be enabled for the e-mail service to
work.
Note:
You must provide a default e-mail address to
prevent users from sending anonymous e-mail
messages.
Email Default
Subject
Default text for the SUBJECT field in e-mail messages
sent by the digital sender.
This default text is used only when users do not
provide a subject of their own directly from the control
panel keypad.
Up to 128 characters are allowed.
E-mail Quality Default image quality used for documents sent by
e-mail.
Choices: B/W Document, Color Document,
Color-B/W Photo.
LDAP Server
Address
IP address of the server that hosts the LDAP
(Lightweight Directory Access Protocol) directory for
e-mail address searches.
C
LEAR sets the address to 00.00.00.00.
If left blank or cleared, the function is disabled.
LDAP Search Root Basepoint (root) from which to start searches for
names on the LDAP directory server. Directories are
often represented in a hierarchical way using a tree.
The basepoint might be a country, an organization, or
other type of group. Not all servers require this
information.
Up to 512 characters are allowed.
See the digital sender website for examples
(http://www.digitalsender.hp.com).
LDAP Service Port TCP/IP port number on which the LDAP directory
server is listening. The default port is 389.
Configuration parameters on the control panel (continued)
Parameter Description