HP A3716A DDS-3 Autoloader User's Manual - 3716-96001

Unpacking and Preparing for Installation
Selecting a Site
1-4
Selecting a Site
You need to find a firm flat surface on which to place the autoloader. The site
should satisfy the following conditions:
n It should be situated away from doors or windows that open outside, to
avoid sudden changes in temperature.
n The environment should be reasonably free from dust and excessive
humidity. Do not place the autoloader on the floor, near a door, near a
heavily-travelled walkway, or near a laser printer.
n There should be at least 150 mm (6 in) of clear space behind the autoloader
to allow for ventilation.
For more details on the conditions under which the autoloader should operate,
see the specifications in Appendix A.
What Next?
If your computer has all the hardware and software it needs to support the
autoloader, you are ready to start installing the autoloader. Go now to
Chapter 2.