HP A3716A DDS-3 Autoloader User's Manual - 3716-96001

Installing Your Autoloader
The Rear Panel of the Autoloader
2-3
The Rear Panel of the Autoloader
Figure 2.1 shows the rear panel of the autoloader with a SCSI terminator fitted
to SCSI connector 2. You only need to remove the terminator if the autoloader
is between two other devices on the bus, or between another device and the
host computer.
Figure 2.1 Rear panel connectors and switches
SCSI ID
Autoloader option
switch setting
SCSI connector 1
SCSI connector 2
with terminator
attached
Power on/off switch
Power connector