HP A3716A DDS-3 Autoloader User's Manual - 3716-96001

Installing Your Autoloader
Configuring Software on Series 800 HP-PB (NIO) Systems Running HP-UX 9.04
2-18
The line should look like the following:
Class LU H/W Path Driver H/W Status S/W S
====================================================================================
spt 0 0/28.0.1 bus_converter.scsi1.target.spt ok(0x8c00202) ok
Creating the Autoloader Changer Mechanism Device Files
1 Make sure the /dev/scsi directory exists:
mkdir /dev/scsi
2 Use ioscan to show the tape drive device files and provide the information
that you need to create the device files:
# ioscan -fn
3 Use mksf to create the device file:
Class LU H/W Path Driver H/W Status S/W St
a
====================================================================================
=
b : : : : : :
scsi - 0/28 bus_converter.scsi1 ok(0x3980) ok
target - 0/28.0 bus_converter.scsi1.target ok(0x1800202) ok
tape_drive 1 0/28.0.0 bus_converter.scsi1.target.tape2 ok(0x1800202) ok
/dev/diag/mt/1 /dev/rmt/1hnc
/dev/rmt/1_8mm8200 /dev/rmt/1hncb
/dev/rmt/1_8mm8200b /dev/rmt/1l
/dev/rmt/1_8mm8200c /dev/rmt/1lb
/dev/rmt/1_8mm8200cb /dev/rmt/1ln
/dev/rmt/1_8mm8200n /dev/rmt/1lnb
: :
/dev/rmt/1hc /dev/rmt/1qicb
/dev/rmt/1hcb /dev/rmt/1qicn
/dev/rmt/1hn /dev/rmt/1qicnb
/dev/rmt/1hnb
spt 0 0/28.0.1 bus_converter.scsi1.target.spt ok(0x8c00202) ok
: : : : : :
Minor number format: 0x00 LU 00 (0x00 00 00 in this example)
00 = Reserved (always 00)
LU = Logical Unit for spt (00)
00 = Reserved (always 00)
Italics indicate information
that you need to supply
These are the
tape drive
device files
# mksf -d spt -m 0x00 00 00 /dev/scsi/C1557A00
Device filename
This can be any name you
like, so long as it is unique.
Minor Number
00 = LU for the spt driver
associated with the autoloader