HP A3716A DDS-3 Autoloader User's Manual - 3716-96001

Using Your Autoloader
Switching on the Autoloader
3-2
Switching on the Autoloader
Switch the autoloader on using the ON/OFF switch on the rear panel. The
power indicator on the front panel lights when the drive is switched on.
The autoloader now performs a self-test routine. This is shown by all three front
panel lights flashing and the message Self Test showing.
If the self-test fails, the Operator Attention Required (bottom) light changes to
steady amber and the other lights go off. See Chapter 8, Troubleshooting, for
details of what to do.
Front Panel
Figure 3.1 shows the front panel of the autoloader. The lights and controls are
described on the following pages.
Figure 3.1 Front panel lights and controls
1 Door for inserting the magazine 5 Operator Attention Required light (amber)
2 Front panel display 6 Select button
3 Magazine Present light (green) 7 Load Cartridge button
4 Tape Activity light (green) 8 Eject button
ON/OFF switch