HP A3716A DDS-3 Autoloader User's Manual - 3716-96001

Index-2
M
magazine Glos-3
labeling 6-4
part numbers B-2
Magazine Present light 3-3
maintenance Ch.6
Media Recognition System
6-7, Glos-3
disabling 2-5
logo 6-8
messages Ch.4
modes of operation
changer 3-8, Glos-1
random 3-8, Glos-3
sequential 3-9, Glos-4
stacker 3-8, Glos-4
MPE/iX, configuring software 2-20
N
NIO, configuring software
(Series 800) 2-9, 2-14
O
OAR see Operator Attention
Required light
offline Glos-3
online Glos-3
operating modes 3-8
Operator Attention Required light
3-4, 4-2
option switches 2-4
ordering information Appx.B
organizing backup Ch.5
P
part numbers B-2
partition Glos-3
amount used 3-3
performance specification A-2
physical specification A-1
positioning the autoloader 6-5, 8-4
power
cord 2-5
cycling 6-5
requirements A-2
socket 2-3
switch 2-3
preventing writing 6-4
problems Ch.8
Q
QIC Glos-3
R
random mode 3-8, Glos-3
cleaning heads 6-2
RAW Glos-3
read-after-write Glos-3
rear panel 2-3
redundancy Glos-3
repositions 6-7
restore, failure 8-2
S
safety A-4
SAM
configuration HP-UX 10.01 2-6
configuration MPE-iX
version 5.5 2-20
SCSI Glos-4
cables 2-5
part numbers B-2
connectors 2-3
ID 2-3, 2-4
planning the bus 1-3
system requirements 1-3
termination 2-5
terminator B-2
Select button 3-4
self-test 3-2
sequential mode 3-9, Glos-4
Series 700
HSC software config 2-6
Series 800
HSC software config 2-6
NIO software config 2-9, 2-14
Series 900
software config 2-20
siting the autoloader 1-4, 8-4
software requirements 1-3
specifications
environmental A-3
performance A-2
physical A-1
stabilizing cartridges 6-5
stacker mode 3-8, Glos-4
status messages 4-2
storing cartridges 6-6
supplies Appx.B
switching on & off 3-2, 6-5
T
Tape Activity light 3-3
tape heads, cleaning 6-2
Tape log 6-4, Glos-4
TapeAlert 6-2, 8-2, Glos-4
TapeAlert log Glos-4
temperature 6-5, A-3
rate of change 6-5
termination 2-5
power 1-4
terminator, part number B-2
time-tracking Glos-5
toner 8-4
tools needed 2-2
troubleshooting Ch.8
U
unpacking 1-2
upgrading firmware Ch.7
use Ch.3
W
WP 3-3
write-protecting 6-4