Fabric Watch Administrator's Guide v6.4.0 (53-1001770-01, June 2010)

Fabric Watch Administrator’s Guide 97
53-1001770-01
Switch Health report
9
2/12 LB 100 0 0 0
2/13 LB 100 0 0 0
2/14 U 0 0 0 100
2/15 LB 100 0 0 0
3/0 T 100 0 0 0
3/1 U 0 0 0 100
3/2 U 0 0 0 100
3/3 U 0 0 0 100
3/4 U 0 0 0 100
3/5 U 0 0 0 100
3/6 U 0 0 0 100
3/7 U 0 0 0 100
3/8 U 0 0 0 100
3/9 U 0 0 0 100
3/10 VE 100 0 0 0
.
.
.
Switch Health report
The Switch Health report lists the following information:
• Current health of each port, based on the currently-configured policy settings.
• High-level state of the switch, the power supplies and temperature monitor.
• All ports that are in an abnormal state and the current health state of each port.
The switch health report is available even without Fabric Watch, but for licensed Fabric Watch
users, the marginal and faulty ports are included in the report. The following is an example of a
switch health report.
NOTE
Switch health report details do not display the health status of GbE ports. Fabric Watch only
monitors and reports the status for physical and virtual FC ports.
Generating a Switch Health report
1. Connect to the switch and log in as admin.
2. Enter the switchStatusShow command to generate a Switch Health report.
cp0 login: admin
Password:
Sat 240 :admin> switchstatusshow
Switch Health Report Report time: 08/21/2006 05:23:22 PM
Switch Name: Sat 240
IP address: 1080::8:800:200C:417A
SwitchState: HEALTHY
Duration: 01:10
Power supplies monitor HEALTHY
Temperatures monitor HEALTHY
Fans monitor HEALTHY
WWN servers monitor HEALTHY
Standby CP monitor HEALTHY