HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

112 Change management
The Select Fabrics window opens (see Figure 55 on page 108).
6. Optional: Rearrange the fabrics you want to monitor for changes. Select the fabric; use the right arrow
to add fabrics and the left arrow to remove fabrics. Click Next.
The Configure Automated Checks window box opens (see Figure 56 on page 108)
If you do not want to edit the schedule, click Configure schedule later, click Next, and skip to step 13.
7. To edit automated checks, click Take Snapshots per this schedule.
8. Select an element in the Start Time field (month, day, year, hour, minute, second, AM or PM) and use
the scroll buttons to change the elements to the exact time you want Fabric Manager to begin checking
the selected fabrics for any changes to your selected parameters.
9. Select an element in the End Time field (month, day, year, hour, minute, second, AM or PM) and use the
scroll buttons to change the elements to the exact time you want Fabric Manager to stop checking the
selected fabrics for any changes to your selected parameters. If you want the automated checks to
continue indefinitely, select the No end date radio button.
10.Enter a number in the Frequency: Every field that corresponds to the number of hours, days, or weeks
you specify from the adjacent pull-down menu. If you want to run the check only once, select once from
the adjacent pull-down menu.
11.Enter the number of days you want to keep the automated check snapshot in the Purge snapshots more
than XX days old field. The minimum number of days is 1 and the maximum 2147483647.
12.Click Next.
The Configure Notification Methods window opens (see Figure 57 on page 109). If you do not want to
receive e-mail notifications or alerts when a change occurs, click Next and skip to step 20.
13.Optional: Click Send email notification to receive notification of change via e-mail.
14.Specify when you want to receive an e-mail notification:
• Only when changes are detected
• Every time the check is run
15.Edit or enter the e-mail addresses. The minimum is one address. Separate multiple e-mail addresses
with commas.
16.Optional: Click Test to send a test message to the e-mail addresses specified.
17. Optional: Click Send alert when changes occur if you want alerts to be triggered for changes to this
change management profile.
18.Select an alert level for the change management alerts (informational, warning, error, or critical).
19. Click Next.
20.Read the confirmation and then click Finish.
Deleting a profile
When you delete a change management profile, all associated snapshots and change reports are also
deleted from the database.
To delete change management profiles:
1. Select Tools > Change Management > Manage Profiles.
The Change Management Profiles dialog box opens (see Figure 53 on page 107). Any existing
profiles are displayed in the dialog box.
2. Select one or more change management profiles from the table and click Delete Profile.
A confirmation dialog box opens.
3. Click OK to delete the selected profiles, and all snapshots and change reports based on the selected
profiles from the database.