HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

Fabric Manager 5.x administrator guide 119
Figure 66 Call Home configuration (description and settings)
7. Enter a name and description for the Call Home configuration.
8. Enter the amount of time (in seconds) that the absence of contact between the server and the switches
warrants a Call Home alert (e-mail or executable).
The minimum allowable time setting is 40 seconds; the default is 50 seconds.
9. Optional: Click the Send “server is alive” message check box and provide a time (in minutes) for how
often you want to receive notification that the server is running. The default (and minimum value) is
one-minute intervals. The server is alive messages include the list of switches in the configuration
and serves as a notice that Call Home is continuing to function properly.
10.Optional: In the External Executable on Server field, enter a path to an executable that resides on the
Fabric Manager server. Fabric Manager runs any executable scripts whenever Call Home sends an
alert. See ”Using the Call Home external executable” on page 121 for additional information.
11.Click Next.
Specify the e-mail addresses where the Call Home e-mail notifications are to be sent. Click Add to
access the Email Address dialog box (see Figure 67).
NOTE: If you do not want to get e-mail notifications (but receive the alerts only in an external executable),
go to step 13. See ”Using the Call Home external executable” on page 121 for additional information.