HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

120 Call Home support
Figure 67 Call Home configuration (e-mail addresses)
12.Enter an e-mail address and then click OK.
13.Read the configured Call Home settings and click Finish.
A dialog box opens, indicating the success of the new configuration.
14.Click OK.
15.Click Close to exit the Call Home wizard.
Editing configurations
You can edit a Call Home configuration at any time. Any change that you make applies immediately when
you commit the change.
To edit an existing Call Home configuration:
1. Select Configuration > Call Home.
The Call Home dialog box opens (see Figure 63 on page 117).
2. Select a configuration from the list.
3. Click Edit to change the configuration settings.
The Call Home Configuration wizard opens. Use the wizard to edit the configuration (see step 3
through step 15 in the section ”Configuring Call Home” on page 117 for details).
4. Optional: You can click Rename to change the name of an existing configuration or click Delete to
delete an existing configuration.
5. Click OK to close the Call Home dialog box.
Enabling or disabling Call Home globally
To enable or disable Call Home globally:
1. Select Configuration > Call Home.
The Call Home dialog box opens (see Figure 63 on page 117).
2. Click Enable or Disable. Any change that you make applies immediately when you commit the change.
3. Click OK.