HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

40 Fabric Manager layout
2. In the User name field, enter the user name that you use to log in to the server.
User names must be alphanumeric and may contain only the following special characters: underscore
(_), hyphen (-), and period (.).
NOTE: Fabric Manager stores your user name and populates the User name field whenever you
subsequently launch the software.
3. In the Password field, enter the password that you use to log in to the server and then click OK.
Fabric Manager is launched (see Figure 2).
Figure 2 Fabric Manager initial launch default window
NOTE: See ”Discovering a fabric” on page 55 for information about adding devices from a SAN for
Fabric Manager to begin monitoring.
Using Fabric Manager
Fabric Manager consists of several elements, illustrated in Figure 3 and described in the following sections:
• Menu bar, next
• Toolbar, page 42
• Fabric tree, page 44
• Content pane, page 46