HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

Fabric Manager 5.x administrator guide 65
5. Click the icon of the switch group that you created.
6. Select the switches that you want to add to your group from the SAN Elements tab and then click the
right arrow to add the switch to the group.
To add multiple switches at once, you can either press and hold the Ctrl key as you click additional
switches or drag any node in the tree to add the switches from that node. Drag switches directly from
the SAN Elements tab to the switch group to populate the group quickly.
7. Click OK when you are finished adding switches to your group.
The group is displayed in the SAN Elements tab, under SwitchGroups. Click the switch group to view its
members.
NOTE: If a switch is removed from a fabric and it was a member of a group, it is also removed from the
group.
Editing a switch group
To edit a switch group:
1. Select Configuration > Groups > Edit Switch Groups.
The Edit Switch Groups dialog box opens (see Figure 26 on page 64).
2. Select the switch group that you want to edit from the right window.
3. Transfer any members from one group to another by dragging the members.
Delete a member from a group by selecting it and clicking Delete in the Edit Groups dialog box.
4. Click OK.
Deleting a switch group
To delete a switch group:
1. Select Configuration > Groups > Edit Switch Groups.
The Edit Switch Groups dialog box opens (see Figure 26 on page 64).
2. Select the switch group that you want to delete from the right window.
3. Click Delete.
You can also delete a group directly from the SAN Elements tab by selecting the group and then
pressing Delete on your keyboard.
4. Click OK.
Creating port groups
To create a group of ports:
1. Select Configuration > Groups > Edit Port Groups.
The Edit Port Groups dialog box opens (see Figure 27).
Figure 27 Edit port groups