HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

Fabric Manager 5.x administrator guide 85
Figure 40 Event filter configuration
4. Select the filters. You can use one, two, or all three of the following filters at one time if you want.
•Click by number and select the number of events you want to capture. This filter defines how many
events are displayed in the Events view at a one time. For a fabric, this is the number of events per
switch.
•Click by severity and select a severity level. This filter displays only events with the specified severity
(Critical, Error, Warning, or Informational).
•Click by time to specify a time interval. Click last and select a number of hours, or click between
and select a start and finish time.
5. Click OK.
Configuring notification parameters
You can configure notification parameters for Change Management mail notifications and Call Home
e-mail notifications on a global basis, because each user on a server shares the same configuration values.
The configuration information is stored in the Fabric Manager database and persists across client and
server reboots.
You must configure notification parameters before specifying that you get e-mail notifications or reports for
Change Management or Call Home.
To configure notification parameters:
1. Select Configuration > FM Options.
The Options dialog box opens.
2. Expand Server specific and click Notifications.
The Notification pane opens (see Figure 41).