HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

Fabric Manager 5.x administrator guide 91
Figure 43 Configuring performance monitoring
2. If you want to collect end-to-end statistics, click On in the End-to-End Monitors display.
If you want to collect switch port transmit and receive data, click On in the Port Rx/Tx History display.
3. Click Save to enable or disable performance monitoring.
4. Optional: Select View Set Monitors to see the list of devices that are being monitored.
The End-to-End View Set Monitors dialog box opens (see Figure 44). This table lists all the device pairs
(initiators and targets) that are being monitored. The list is useful if there is a resource limitation or
license issue and all possible conversations are not being monitored. The monitors that could not be
set are listed in the Not Set Monitors tab.
Figure 44 Viewing the end-to-end monitors that are set/not set
5. Click Close to return to the Performance Monitoring Configuration dialog box (see Figure 43).
6. Optional: Select Refresh Monitors to reestablish the End-to-End monitor set at any time.
This option is useful when you do not want to wait for the monitor set to be updated (for example, after
zoning changes have been made).