HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

94 Using the Performance Monitor
7. Select the Granularity (the time interval between samples).
The available options are 5 minutes, 30 minutes, 2 hours, and 1 day. See ”Granularity” on page 88
for information on how granularity is calculated.
8. For Port Statistics reports only: Select the ports you want to generate the report on:
•Click All: Includes all ports in the database with the specified granularity and time range.
•Click Device Ports Only: Includes only device ports (F_Ports and L_Ports) in the database with the
specified granularity and time range.
•Click ISL Ports Only: Includes only ISL ports (EX_Ports and E_Ports) in the database with the specified
granularity and time range.
•Click Advanced Port Selection and then click Select Ports if you want to select specific ports.
The Advance Port Selection dialog box opens (see Figure 46).
All of the switches that were available when the Generate Report dialog box opened are listed. If
another user has discovered or removed a fabric, switch, or port since then, it is not reflected in
this list.
NOTE: If the port type of a switch in a fabric changes, and performance monitoring is enabled, multiple
port WWNs with different port types are displayed in the performance monitor table and graph reports.
Figure 46 Selecting ports for a custom report
9. Select the ports from the Available Switches list that you want to include in the report. Use the right
arrow to move them over and then click OK.
The Generate Report dialog box reopens (see ”Generate custom report” on page 93).
10.Click OK.
If you selected Display HTML as the format type for your report (in step 4), the report is displayed (see
Figure 47).