HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

Fabric Manager 5.x administrator guide 99
Figure 50 Creating a report or graph template
7. Click Last, enter a number, and then select the time increment (minutes, hours, or days).
8. Select the Granularity (the time interval between samples).
The available options are 5 minutes, 30 minutes, 2 hours, and 1 day. See ”Granularity” on page 88
for information on how granularity is calculated.
9. For Port Statistics reports only (go to step 10 for End-to-End monitoring reports). Select the ports on
which you want to generate the report:
NOTE: If the port type of a switch in a fabric changes, and Performance Monitor is enabled, multiple
port WWNs with different port types are displayed in the Performance Monitor table and graph reports.
•Click All: Includes all ports in the database with the specified granularity and time range.
•Click Device Ports Only: Includes only device ports (F_Ports and L_Ports) in the database with the
specified granularity and time range.
•Click ISL Ports Only: Includes only ISL ports (EX_Ports and E_Ports) in the database with the specified
granularity and time range.
The Generate Template dialog box opens (see Figure 50).
10.Click OK.
The Save Template dialog box opens (see Figure 51).