HP StorageWorks Fabric OS 6.0.0b release notes (5697-7345, April 2008)

Closed defect summ ary
Solution
Discovery Domain does not show all the DD’s that are members of
DDSET when configured from usability wiz ard.
Fixed in Fabric OS 6.0.0
On the "Configure DD" screen, when adding a new Discovery
Domain (DD) and adding VT and VI, it also adds VT and VI from
the existing DD.
Fixed in Fabric OS 6.0.0
In "Zoneadmin" role, when ADs are configured, "set default mode"
option (under zoning actions tab) should be disabled.
Fixed in Fabric OS 6.0.0
If an active ip
v4 policy has "80 accepted; 80 denied; and 443
accepted," bo
th http and https are disabled on the switch.
Fixed in Fabric OS 6.0.0
On a 4/256 SAN Director, Web Tools shows D H CP is on. User
cannot change IP address from Web Tools since it blocks the static
IP address change when D HCP is enabled.
Fixed in Fabric OS 6.0.0
Firmware upgrade on 400 Multi-protocol Router from Fabric OS
5.1.1b to 5.3.0_rel_bld46 results in segmentation fault message.
Fixed in Fabric OS 6.0.0
During firmwaredownload process, creating an IP interface while
BP cod e is still loading may result in kernal panic.
Fixed in Fabric OS 6.0.0
MIBS: Walk and Table View shows different outputs for the same
table.
Fixed in Fabric OS 6.0.0
NPIV failed to work after firmware is upgraded from pre- Fabric OS
5.1.0 to Fabric OS 5.1.0 or higher. Downgrade and upgrade resolve
the problem.
Fixed in Fabric OS 6.0.0
Unexpected menu appears after Customize Report tab selected in
Fabric Watch from GUI.
Fixed in Fabric OS 6.0.0
Ports did not link up on a specific3rdpartyhost/HBAafterhosts
were rebooted. Switch not ready for F or L por ts.
Fixed in Fabric OS 6.0.0
Need a command to query aptpolicy of application blades. Fixed in Fabric OS 6.0.0
Need to upd ate Help p age for the new aptpolicy -ap command.
Fixed in Fabric OS 6.0.0
aptpolicy -ap c om mand needs to validate command line
argument.
Fixed in Fabric OS 6.0.0
We b Tools: Fabric Events window c annot collect info from other
switches connected to the fabric.
Fixed in Fabric OS 6.0.0
Web Tool
s shows internal por t s for embedded switch supporting an
E-Port,
which is inconsistent with the C LI.
Fixed in Fabric OS 6.0.0
While configuring FCIP tunnel through FCIP wizard, the SAN
connection drop down menu shows only one option—SAN extension.
Thereshouldbetwootheroptions—"FCREdgefabric"and"FCR
backbone fabric"
Fixed in Fabric OS 6.0.0
HP StorageWorks Fabric OS 6.0.0b release notes
19