ACC HDLC-NRM (SDLC) User's Guide

Software Installation and Verification
Installation Verification
Chapter 226
Step 4. Bring up the ZCOM subsystem:
% zmasterd cold /opt/acc/cfg/hdlcnrm_sample.tmem
It is suggested that the system console (or the appropriate
/var/opt/acc/log/*.tlog file, e.g. mon.tlog, tue.tlog, etc.) be monitored to
make sure the ZCOM subsystem comes up. The following zmlog
messages should be seen:
-------------------------------------------------------------------
Tue Mar 14 13:10:22 2000: zmlog: message logging resumed
-------------------------------------------------------------------
13:10:22 znode 00109 ZCOM system down, exiting
13:10:22 zmast 00129 Stopping zmlog daemon.
13:10:22 zmon 00049 End of ZMON request, program terminated
13:10:22 zmon 00075 ZCOM system stopped
13:12:06 zmast 00101 Launched daemon zmlog, pid 1350.
13:12:06 zmast 00117 Zmasterd daemon start running ...
13:12:06 zmast 00101 Launched daemon zmon, pid 1351.
13:12:07 zmon 00002 Resource manager (Rev 1.32) for ZCOM 6.2.0.0
13:12:07 zmon 00003 Cold start with: hdlcnrm_sample.tmem
13:12:07 zmon 00100 Card 0 starting up ...
13:12:15 zmon 00110 Card 0 startup successful, card READY
13:12:15 zmon 00020 Cold start completed, ZCOM system ready
13:12:15 zmon 00004 Waiting for ZMON requests ...
13:12:15 zmast 00101 Launched daemon znode, pid 1372.
13:12:15 zcom 00165 Node 123 is now UP
Step 5. Use the zmntr utility to display the original state of the HDLC-NRM
(SDLC) terminals:
% zmntr
ZMNTR> tt 1 20
ZLU# Mx p:sc Terminal Description..... Rx.Mes Tx.Mes Error E.Rate State.
0001 00 0:00 HDLC/NRM Primary A 0 0 0 0.00% Disabled
0002 00 0:00 HDLC/NRM Primary B 0 0 0 0.00% Disabled
0011 00 1:00 HDLC/NRM Secondary A 0 0 0 0.00% Disabled
0012 00 1:00 HDLC/NRM Secondary B 0 0 0 0.00% Disabled
**** ** ** Message totals 0 0 0 0.00% *******
ZMNTR> ex