ACC HDLC/LAP-B (ABM) User's Guide

28 Chapter2
Software Installation and Verification
Installation Verification
Step 11. The sent data can now be received and displayed:
ZTERM> rx list
13:44:51 Msg from tmnl ZLU#00020(00123) len 50 No error detected
Lcn .00. .01. .02. .03. .04. .05. .06. .07. .08. .09. ASCII.....ASCII.....
000 5A74 3031 3534 3100 206D 6573 7361 6765 206E 6F2E Zt01541 message no.
010 2030 3030 3031 206C 656E 6774 6820 2020 2035 3024 00001 length 50$
020 6F70 7172 7374 7576 7758 opqrstuvwX
13:44:51 Msg from tmnl ZLU#00020(00123) len 50 No error detected
Lcn .00. .01. .02. .03. .04. .05. .06. .07. .08. .09. ASCII.....ASCII.....
000 5A74 3031 3534 3100 206D 6573 7361 6765 206E 6F2E Zt01541 message no.
010 2030 3030 3032 206C 656E 6774 6820 2020 2035 3024 00002 length 50$
020 6F70 7172 7374 7576 7758 opqrstuvwX
<CNTL-C>
13:44:53 Error on ZREAD: Interrupt occurs while waiting
13:44:53 Messages received 2, Messages sent 0
13:44:53 Elapsed time secs 2, Messages/sec 1
13:44:53 Data in KBytes 0, Data rate (KB/s) 0
13:44:54 Sys CPU 0%, User CPU 2%, Total CPU 2%
13:44:54 Mux 0 utilization 1%
ZTERM> ex
Step 12. TheASCIIpartofthedisplayedmessagecanbeusedtoobservethe
message number. The rx command must be terminated using a <cntrl-C>
command.