ACC Installation and Configuration Guide

Dual Interface Configurations
Checking Port Modes
Chapter 464
Checking Port Modes
Use the mx command of the zmntr utility to view the current mode of the
ports on a given MUX. For example, to view the ports on MUX 1 of an 8
channel ACC card:
HPAMS1R> zmntr
ZMNTR: ZCOM 6.2.0.0 Runtime Monitor, Rev 1.0
ZMNTR> mx,1
Interface card information for ACC X.25 ttgen input file
TTGEN source /usr/zcom/opt/acc/cfg/duplex.answ
object /usr/zcom/opt/acc/cfg/duplex.tmem
Mux:01 Bus:00/01 Slot:03 Trms:0004 Card Stat:Up and active
Firmware download file: /usr/zcom/opt/acc/z7200a/x25.zabs
Module: X25 Linktime: Mon Aug 18 15:55:37 1997
ROM-ID: UMUX302A [04.X] Updated: Tue Aug 04 08:50:00 1992
Connection: Dual system RS232 panel Mux MPU utiliz: 1%
Pt# Status TXlim TXusd PMode Cmode Ecde Clk Baudrate Mult Parity Stbits
0 Up 20000 0 TriSt SDLC NRZ Int 9,600 X.1 None
1 Up 20000 0 TriSt SDLC NRZ Ext 9,600 X.1 None
2 Up 20000 0 TriSt SDLC NRZ Int 9,600 X.1 None
3 Up 20000 0 TriSt SDLC NRZ Ext 9,600 X.1 None
4 Up 20000 0 TriSt SDLC NRZ Int 9,600 X.1 None
5 Up 20000 0 TriSt SDLC NRZ Ext 9,600 X.1 None
6 Up 20000 0 TriSt SDLC NRZ Int 9,600 X.1 None
7 Up 20000 0 TriSt SDLC NRZ Ext 9,600 X.1 None
ZMNTR>