ACC Programmer's Reference Guide

Chapter 4 185
ZCOM C I/F Library Routines
ZCONFIG (3X)
data.setctl.cfg_class
Caller supplied type of reconfiguration. There is one predefined configuration
class, ZcCLASS_X25. This event should be generated whenever an X.25 link
is dynamically configured. This includes modifying the number and/or t ype of
Virtual Circuits and creating or deleting an X.25 level 2 (LAPB) ZLU.
If the ZCOM Subsystem is used with X25/9000 and x25init is executed, this
event will be generated if the configuration for an X.25 link is modified. This
fieldisusedforaction 3only.
data.setctl.cfg_info1
Caller supplied information that should be specific to the type of
reconfiguration which took place. In the case of ZcCLASS_X25, this field
must contain the X.25 Level 2 ZLU of the link’s configuration that was
modified. Note that even if the ZLUs for a link were deleted from the
configuration, the old Level 2 ZLU must still be supplied. A positive ZLU
number indicates the link has been added, while a negative ZLU value
indicates the link was deleted. This field is used for action 3only.
Response Data
No specific response data or error.
System
Configuration
There are 5 system configuration actions. They are for altering
parameters related to the whole ZC OM runtime subsystem. Action 1is
for changing the ZCOM runtime system name. The system name is for
information purposes only. This function does not affect the operation of
the ZCOM subsystem.
Action 2-5 modify various default queue limits in the ZCOM subsystem.
Such default limits only affect newly created queues. To modify limits on
existing queues, use the zsetql(3X) routine instead.