ACC Programmer's Reference Guide

204 Chapter4
ZCOM C I/F Library Routines
ZCONFIG (3X)
Configuration Data
header.config
ZCOM_ZCONFIG_TERM (terminal configuration)
header.action
header.tag1,
header.tag2
Any values.
data.setterm.zaddr
ZLU of the related terminal. The “node”field is not used. For action 1and2,if
ZLU is non-zero, it must be an unassigned one and ZLU checksum is not
necessary. If ZLU is zero, the system chooses an arbitrary (unused) one. For
actions ZcDSC_CLEAR_TERM, ZcDSC_DELETE_TERM, and
ZcDSC_MOVE_TERM, the ZLU must be defined and the ZLU checksum
must be valid.
data.setterm.daddr
ZLU of the destination terminal. It specifies the destination PTT to which the
newly created terminal is linked. It must be a defined terminal and the
checksum must be valid. The “node” field is not used. It is used for action
ZcDSC_CREATE_LTT_ON_PTT only.
data.setterm.iftno
Interface card number (0, 1,...). It specifies to which interface card t he new
terminal is linked. This field is needed for actions
ZcDSC_CREATE_LTT_PTT and ZcDSC_MOVE_TERM only.
ZcDSC_CREATE_LTT_PTT (1) - Creat e a new terminal (LTT and
PTT)
ZcDSC_CREATE_LTT_ON_PTT (2) - Create a new LTT on an existing
PTT
ZcDSC_CLEAR_TERM (3) - Clear connection to an existing
terminal
ZcDSC_DELETE_TERM (4) - Delete an existing terminal
ZcDSC_MOVE_TERM (5) - Move an existing termina l to
another port