ACC Programmer's Reference Guide

Chapter 3 73
ZCOM Tables and Data Structures
Physical Terminal Tables
PTUSER - User-maintainable area
This area extends to the end of the physical terminal table. It defines the
area that may be modified by a zptup call, and contains all the following
fields:
PTPOLL -Terminalpolladdresses
PTSLCT - T erminal select addresses
These words usually contain the poll and s elect addresses specified for
the terminal in the TTGEN configuration file. For some protocols
however, they contain other configuration information. Specific content
for these words is documented in protocol accessory manuals.
PTOP TN - P rotocol options
Used to define options to the protocol module on the Mux interface card.
Only bits 0 - 7 are relevant to the Mux. Bits 8 - 15 may contain other
(host level) options. The definition of the bits depends on the protocol
(PTTYPE) type.
PTVCNO - X.25 logical channel number
Used to contain status information - by x25cn & zx25d for X.25
terminals.
PTCNFG - Special configuration
For X.25, contains a call number.
PTCWCT - Terminal control write counter
This counter is incremented by the driver every time a control write
buffer for this terminal is transferred to the Mux interface card.
PTTXCT - Terminal transmit message counter
This counter is incremented by the driver every time a transmit buffer
for this terminal is transferred to the Mux interface card.
PTRXCT - Terminal receive message counter
This counter is incremented bythe driver every time a receive message is
transferred from the Mux interface card for this terminal.