ACC Release Notes for the B.03.01 Release

19
Advanced Communications Controller Release Notes for the B.03.01 Release
Compatibility Information and Installation Requirements
Compatibility Information and
Installation Requirements
Software Requirements
• Products Z7476AA ACC and X.25/9000 Software Bundle,
Z7478AA ACC Base Software, and Z7486AA ACC Protocols for
Appplication Developers only require the basic HP-UX
operating system.
• Product Z7480AA ACC X.25/9000 Link Software requires both
Z7478AA ACC Base Software and J2793B X.25/9000 product
to be installed first or together. (For convenience in product
ordering and installation, these three software products are
bundled into the single product Z7476AA ACC and X.25/9000
Bundle.)
Hardware Requirements
• The ACC software runs on both HP9000/800 servers and
HP9000/700 workstations. It supports both 32-bit (PA7x00)
and 64-bit (PA8x00) hardware.
• ACC software only works with ACC interface cards (Z7200A,
Z7300A, Z7330A, Z7350A and Z7400A). If an ACC interface
card is not present, the software can only run as a remote
application system using ACC remote node access
functionality.
• The Z7330A 4-channel PCI card is a limited distribution
product.
• In a multi-system ACC cluster, all systems must be linked
together with LAN network communications hardware
running TCP/IP. All systems must be running on HP-UX 11.0
with the B.03.01 ACC software installed.