ACC Release Notes for the B.03.01 Release

28
Advanced Communications Controller Release Notes for the B.03.01 Release
Patches and Fixes for this Version
22. Reference: TPO0h01617
When a restart was required on an
active 8-port EISA ACC card, due to
firmware failure, the restart sequence
was attempted five times
unsuccessfully.
The driver reports the following errors:
Backplane command (DMA) has timed out !
Activate error: MUX timed out
The DAM and firmware have been
corrected.
23. Reference: TPO0h01643
The zmon log message 00111 (Last
backplane command) had bad
information for 4-port card.
zmon has been modified to display the
correct information.
24. Reference: TPO0h01645
ZMNTR loopback command does not
report errors for wrong options used.
The only options accepted now are “i” “e”
or “2”. The first bad option character is
reported to the user. This problem is fixed
in this release.
25. Reference: TPO0h01661
DAM runs a heartbeat timer on an
“unusable” card.
Invalid argument passing while calling
nacc1_untimeout() is fixed in this release.
26. Reference: TPO0h01748
zmntr mx command for 8-port MUX
showed the port “Txusd” field as only
64-bytes used when the transmit limit is
20,000 bytes.
The values displayed in the “Txusd” field
have been corrected for all types of ACC
interface cards.
Symptoms Defect / Fix