ACC Utilities Reference Guide

ZTERM - Interactive Routine Interface
ZTERM Available Commands
Chapter 4 105
DL - Display Logical Terminal Table Information
Format: DL,ZLU1 [,ZLU2] [,+Q]
Displays the logical terminal information for the specified terminal ZLU
or range of ZLUs. The information is in hexadecimal and ASCII. The +Q
option suppresses the hexadecimal listing. See under “Terminal Table
Pages” in the section on Tables and Data Structures in the ACC
Programmer’s Reference Guide, for the logical terminal table layout.
ZTERM> dl 10
09:03:50 Owning ZLU 10
09:03:50 Mux number 1
09:03:50 Port number 1
09:03:50 Term. number 32
09:03:50 Next group ZLU 10
09:03:50 Device type 48
09:03:50 Logical type 99
09:03:50 Sys status flg 0h
09:03:50 MX prog node 0
09:03:50 MX prog ZLU# 0
09:03:50 Rcvr prog node 0
09:03:50 Rcvr prog ZLU# 0
09:03:50 Log. term addr 0h
09:03:50 Logical status 0h
09:03:50 Tx count 0
09:03:50 Rx count 0
09:03:50 Error count 0
09:03:50 Application # 10
09:03:50 Institution # 0
09:03:50 Branch # 0
09:03:50 Work # 0
09:03:50 Area # 0
09:03:50 Terminal name L2 DCE
Lcn .00. .01. .02. .03. .04. .05. .06. .07. .08. .09. ASCII....ASCII....
000 000A E5D0 0001 0120 002D E088 000A 0030 0063 0000 eP -‘ 0 c
010 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
020 0000 0000 7FFF FFFF 0000 0000 0000 0000 0000 0000 ““““
030 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000
040 0000 0000 7FFF FFFF 0000 0000 0000 0000 0000 0000 ““““
050 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000
060 0000 0000 7FFF FFFF 0000 0000 0000 0000 0000 0000 ““““
070 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000
080 0000 0000 7FFF FFFF 0000 0000 0000 0000 0000 0000 ““““
090 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000
100 0000 0000 7FFF FFFF 0000 0000 0000 0000 0000 0000 ““““
110 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000
120 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
130 000A 0000 0000 0000 0000 4C32 2044 4345 2020 2020 L2 DCE