ACC Utilities Reference Guide

ZMNTR - ZCOM Runtime Monitor
Commands
Chapter 3 77
Commands
?? - Display Help List of Commands
Format: ??
ZMNTR> ??
Code Description................... Code Description..................
EX - Exit program (or /E) DC - Display terminal config
AC - Activate terminals (RE) DE - Deactivate terminals (FL
EN - Enable terminals (SU) DI - Disable terminals (SD)
MX - Display mux configuration LB - Loopback test
RC - Reset rx.mes, tx.mes, errs cnts TT - Display terminal info
PT - Display terminals on a port TR - Transfer to command file
R - Repeat Enable/Disable TM - Set auto repeat time interval
LL - Set new list file TO - Top of form on list file
SET- Set or display ZMNTR settings ! - Execute a shell command
For more detail on a specific request type ??,XX
The help listing can be invoked at any time from the ZMNTR prompt. To
list the help screen to a file, use the LL command to change the output to
the desired file, then enter the ?? command.
To display more information on each command, enter:
??,xx
where xx is replaced by the two letter command name. For example:
?? mx
Request format:- MX,m1,m2,[opts]
This command displays the card and port configurations for ACC
cards in the range m1 to m2.
The [opts] parameter allows the display of the text, filename,
and NAM records in the ACC download file and the configuration
of the ports. The options can be in any order.
the options are:
N - display nam records
T - display text records
F - display file records
P - display port configurations
S - display subchannel and timeslot configurations
If no options are specified p is assumed.