ACC Utilities Reference Guide

ZMNTR - ZCOM Runtime Monitor
Commands
Chapter 386
Status The Status field shows the port status. The value of
this display can be the following:
Up Port is up and usable.
Down Port has failed the selftest or the port
was configured with an invalid
configuration value. The port is
unusable.
TxLim Port buffer usage has reached the
TXlim value. The port can still
receive messages but additional data
cannot be transferred to the ACC
card for this port until one or more of
the current outstanding messages
already sent to the ACC card for this
port have been transmitted. Unless
there is a problem with the protocol
software, this is a transient state.
TXlim This is the maximum number of bytes that can be sent
to the port before the port is placed in the TxLim
suspend state.
TXusd This is the current buffer usage (in bytes) of the ACC
card’s transmit buffers on a per port basis. When this
value reaches the TXlim value, the port will be TxLim
suspended.