ACC Utilities Reference Guide

ZMNTR - ZCOM Runtime Monitor
Commands
Chapter 394
Disabling Commenced disable of link
X.25 Switched Virtual Circuits (SVCs):
No call No call is established
Call Setup In the process of setting up a call
Call Estb The call has been established
Resetting The call is being reset. Unacknowledged messages are
discarded
Clearing In the process of clearing the call
X.25 Permanent Virtual Circuits (PVCs):
Not usable The PVC is not functioning
Usable The PVC is functioning correctly
Resetting The PVC is being reset. Unacknowledged messages are
discarded
Of these states, there are four that are transient and will not often be
seen. These are: “Clearing”, “Disconcting”, “Local Clrd”, and “Remote
Cleared”. Also, X.25 links and virtual circuits have a terminal state of
“UP”, “DN” (down), or “SD” (shutdown), as well as a link or virtual circuit
state.
The X.25 terminal types are indicated by a character between the port
number and subchannel number. The characters used are, “V” for an
X.25 virtual circuit and “L” for an X.25 link terminal.