ACC X.25 Data Analyzer User's Guide

Installing the Data Analyzer
Installing the Analyzer Software
Chapter 2 21
However, the prompt Display> indicates that pdisplay is ready for
interactive commands, and you can still use it for this installation
verification procedure.
Use help or ?? to display the possible commands.
The next command (see below) will display the first four events in the
sample capture file. Here the option “-e 1 4” selects the first four events.
(Refer to the display and options commands in Chapter 3, “Data
Analyzer Commands,” on page 25) After this command has been
successfully performed, proceed to the section on “Configuring the
Analyzer” on page 23.
Display> display /var/opt/acc/log/sample.eve -e 1 4
The following four events will be displayed:
event 0001 Chan:00 00:00:00.000
lead status: RS DTR CS DSR CD
event 0002 Chan:00 00:00:00.788
LAPB:INFO C Addr01 Nr4 Ns7
X.25:CALL REQUEST
mod8 LCI 20
Called addr 46500561
Calling addr 46500561
event 0003 Chan:00 00:00:00.917
LAPB:INFO C Addr03 Nr0 Ns4
X.25:INCOMING CALL
mod8 LCI 1
Called addr 46500561
Calling addr 46500561
event 0004 Chan:00 00:00:00.927
LAPB:INFO C Addr01 Nr5 Ns0
X.25:CALL ACCEPTED
mod8 LCI 1
Called addr Addr length = 0
Calling addr Addr length = 0
Total events =251, events displayed =4
Display>